This sink trap is an innovative, inexpensive solution to messy, hard-to-use sink traps. The trap provides you with an economical solution that is easily installed and maintained. The trap is connected below the sink and collects solids in a bottle.
When the solids reach the fill line on the bottle, the excess water in trap is drained through a valve, the bottle is exchanged with a replacement bottle, the valve shut and the trap is back in service.Bottle exchange is rapid and done without the need of tools (less than 2 minutes!). Most of all, there is no mess and minimal chance of water spillage.
When the solids reach the fill line on the bottle, the excess water in trap is drained through a valve, the bottle is exchanged with a replacement bottle, the valve shut and the trap is back in service.Bottle exchange is rapid and done without the need of tools (less than 2 minutes!). Most of all, there is no mess and minimal chance of water spillage.
Services
Determine Your Size
Report
Fix A Leak
Report
When your Gleco Trap is properly installed, it shouldn't leak. But if it does, here are a couple of common problems and solutions. If your problem is not solved by these notes, contact us and we'll talk about your specific situation. If you are installing a brand-new O-Ring, give it a quick tug to stretch it slightly and dab a little petroleum jelly on it (or into the channel) before installing - it will fit into the channel a lot easier.
Info for Artists
Report
FOR POTTERS: Most ceramics and mixed-media art classrooms and studios do very well with the GT64, which allows for a sediment volume of 64 ounces. It would depend on how messy the potter is, but even the messiest potters usually wash less than a couple of ounces of clay from their hands. That translates to around 60-80 messy students washing their hands before you'd need to dump the contents of The Gleco Trap.
Reviews
Be the first to review Liquid Assets.
Write a Review