When it comes to family, friends and good times on the water you might not be thinking about safety. With Lift Tech Marine products, you don't have to. We build safety features in all our products. Not only that we test them, multiple times from our wheel drives to our direct drive motors. We use Momentary switches.
These switches only remain on as long as they're being pressed. We use a soft start. It suppresses the in rush of current to protect the motor and circuit board. We use circuit boards to program safety into the motor. If the motor gets to hot, pulls to many amps or detects an issue the board will go into a safety mode to prevent damage.
These switches only remain on as long as they're being pressed. We use a soft start. It suppresses the in rush of current to protect the motor and circuit board. We use circuit boards to program safety into the motor. If the motor gets to hot, pulls to many amps or detects an issue the board will go into a safety mode to prevent damage.
Services
Accessories
Report
Solar Charge Regulator offers NEW features and more protection. Includes a LED Charging Status, Reverse Solar Status, Overcharge Protection, Micro Processor Control, IP 65 Sealed Electronics, Blown Fuse Alarm and LED, and IBMS Technology - (Intelligent Battery Management System). An overcharged battery will boil the sulfuric acid and distilled water mix.
Ac Motors
Report
Set the upper and lower limits so your lift will stop automatically at the desired positions. All New Remote Motors come with Bluetooth built in so you can use your phone as a remote control. The Auto-Stop unit is designed to automatically stop the lift at user defined upper and lower limits, preventing accidental over travel.
Remote Controls
Report
If your neighbors have a Lift Tech Marine unit, make sure they are not using their lift while you are programming. If you are pressing buttons on the circuit board and someone close to you is using their wireless remote controls, there is a chance their remote will pair with your Lift Tech Marine unit.
Trouble Shooting
Report
If Remotes Controls stop working on DC Motors, Try unplugging the battery (12v or 24v) from the motor itself for 1 minute. Then plug the battery back into the motor and try the remote controls. This will reset them. 2. Make sure connection are plugged in all the way where battery wire and motor connect.
Warranty
Report
Lift Tech Marine warrants our motor from defects in materials and workmanship under normal use for a period of 2 years from the date of purchase as evidence by the purchase receipt. During the warranty period, Lift Tech Marine will repair or replace the motor if defective. This warranty is limited to the original purchaser and is not transferable.
Reviews
Be the first to review Lift Tech Marine.
Write a Review
